OPTIONAL EQUIPMENT
Model CX can be equipped with:
– 12 and 15 X booms that open hydraulically, lift hydraulically and are leveled according to the principle of springs
– 18 In booms that open hydraulically, lift hydraulically and have a hydraulic leveling lock
The standard equipment of all booms consists of triplex nozzle supports, spaced at 50 cm, which house Lechler plastic nozzles (ST 110-02, ST 110-03, ST 110-04). As additional equipment, we offer a large selection of Lechler nozzles with and without a ceramic insert, nozzles designed for wind treatment ID, universal nozzles IDK, nozzles with a double jet IDK T, and the latest generation of asymmetric nozzles IDTA.
In addition to the main tank, which exists in variants of 800, 1000 and 1200 liters, the sprayer is equipped as standard with an additional tank for rinsing the main tank, a tank for washing hands, as well as a container for preparing chemistry (mixer container) with a rinsing tank.
The sprayers are equipped with pumps with 4 membranes, namely:
– B-105 (models 12 and 15 X) with a maximum pressure of up to 50 bar and a maximum flow of up to 105 liters per minute
– B-160 (model 18 U) with a maximum pressure of up to 50 bar and a maximum flow of up to 160 liters per minute
The sprayers are standardly equipped with a BDL-105 regulator with 5 outlets and with a maximum pressure of up to 50 bar and a maximum flow of up to 130 liters per minute.
As additional equipment, we offer ARAG regulators in the following variants:
– The regulator that allows the main spraying valve to be ON/OFF turned on and off from the tractor cab and regulates the pressure.
– The regulator that allows the main sprinkler ON/OFF valve as well as the section (5) to be turned on and off from the tractor cab and regulates the pressure.
- Automatic spray regulation - BRAVO 180S computer for spraying.
The simplest and most affordable computer for sprayers and atomizers. By entering the norm, it takes control of the distributor and maintains the set norm. Automatic shut-off of spraying when the speed drops below a certain minimum. Visual and audible alarms. The displayed data are: rate, speed, pressure, flow, amount of water consumed, water level in the tank, sprayed area, duration of spraying, distance traveled. Comes complete with all cables and wheel mounted speed sensor.
As an additional equipment, we also offer a hydraulic distributor for opening the branches, which enables independent opening of the left and right sides (standard equipment for the model with 18 U branches).
The sprayers are supplied with a PTO shaft, a suction hose and manipulative wheels.
STANDARD EQUIPMENT
Regulator BDL-105
Max.pressure 50 Bar
Max.flow rate 130 lit/min
5 outlets
Pump B-105
Max.pressure 50 Bar
Max.flow 105 lit/min
Max.power 13 HP
Max.rotation 540 rpm
4 membranes
Nozzles
Triplex
PTO Shaft
Suction hose
Hand washing tank
13 litres
Rinsing tank
65 litres
Mixer tank
30 litres
Hydraulic distributor for opening booms
Independent left and right side opening STANDARD equipment only on models with U booms
OPTIONAL REGULATORS
Regulator ARAG PR3BF/5
"STANDARD"
- Divides the booms into 5 parts
- With manual pressure regulation
Regulator ARAG PR3ECF/5
"ON/OFF"
- Divides the booms into 5 parts
- With pressure balancing
- With ON/OFF from the cabin and pressure regulation from the cabin
Regulator ARAG PR10ECF/5EC FR
"SECTIONS"
- Divides the booms into 5 parts
- With pressure balancing
- With ON/OFF from the cabin and pressure regulation from the cabin
- Sections management from the cabin
Regulator ARAG PR10ECFM/5EC BRAVO 180 S
"BRAVO"
- Divides the booms into 5 parts
- With pressure balancing
- BRAVO computer
PR10ECFM/7EC+2 BRAVO 400S
State-of-the-art ARAG monitor. 5.7" display, 2 USB ports and SD card for loading and data transfer, 2 camera inputs, 2GB of internal memory.
This monitor can be upgraded. It can be connected to an antenna and used as GPS navigation. It can be connected to a switch box and serve as a classic sprayer computer, and it can also be used for automatic section
control via GPS where it turns the sections on or off if there is an overlap.
This monitor can also be connected to an electric motor so it can to be used for automatic tractor steering
| MODEL | CX 800-12 | CX 800-15 | CX 1000-12 | CX 1000-15 | CX 1200-12 | CX 1200-15 | DU 800-18 | DU 1000-18 | DU 1200-18 |
|---|---|---|---|---|---|---|---|---|---|
| Capacity (lit) | 800 | 800 | 1000 | 1000 | 1200 | 1200 | 800 | 1000 | 12000 |
| Pump | B-105 | B-105 | B-105 | B-105 | B-105 | B-105 | B-105 | B-105 | B-105 |
| Booms (m) | 12 | 15 | 12 | 15 | 12 | 15 | 18 | 18 | 18 |
| Height adjustment | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
| Boom opening | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
| Regulator | BDL-105 | BDL-105 | BDL-105 | BDL-105 | BDL-105 | BDL-105 | BDL-105 | BDL-105 | BDL-105 |
| Nozzles | Triplex | Triplex | Triplex | Triplex | Triplex | Triplex | Triplex | Triplex | Triplex |
| Weight (kg) | 745 | 785 | 760 | 800 | 775 | 815 | |||
| Hydraulic distributor for opening booms | - | - | - | - | - | - | STANDARD | STANDARD | STANDARD |
| Hand washing tank | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD |
| Rinsing tank | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD |
| Mixer tank | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD | STANDARD |
Frequently Asked Questions
If some details you can't find here, please refer to our DOCS and check everything
What happens if what I ordered is out of stock?
As soon as you place an order, our dedicated supply management will send ETA to your shipping address and inform you about it.
Can I get the machine in my country?
We are familiar with all frights that can deliver our machines almost anywhere in the world.
I want to order full truck of machines
That is great to hear! Don't worry, it's our day to day business and we are well prepared for any kind of loading. You can expect from us suggestions in order to optimize shipping cost
What about service and maintenance?
We were wondering when you will ask this question to which we think there is no stronger answer on the market. Check our maintenance and how we approach it, then send it as an template how all the others should work on this, in our opinion, most important topic of all time.
What is the maximum quantity you can produce?
Currently we are sitting on 600 subsoilers a year, but capacity is well capable of doing more since we are well optimized business that doesn't have needless management and board to make a decision. Subsoilers take most amount of time to make, so other products are much faster.
